Posts
I sent 1,000 empty pieces of 45 ACP brass to Neil at NSK Sales along with a check for $155.35 to reload them as “wad” (Bullseye) ammunition. My total cost per round will be at $0.16 per round after adding in the postage for the empty brass. (The check consisted of $121.25 for the reloads and $34.10 for the return shipping.) The cheapest ammunition I had been able to find is the 100 round white box of Remington from Walmart and, at $19.95 (plus tax), that ammunition works out to be $0.22 per round. Neil’s reloads are seven cents a round cheaper.
It is a fairly common belief that if the wobble measures 1" at the muzzle, it will measure about that same size on the target. Sounds reasonable, right?
(Posted to Bullseye-L.)
It’s worth mentioning an “oops” (Accidental Discharge) I had while doing the Ball and Dummy drill in the hope that someone else may avoid doing likewise.
(Posted to Bullseye-L.)
I’m really struggling with the 45.
Any tips on ridding myself of flinch and anticipation? (I occasionally catch myself closing my eyes now, too. Argh!)
For everything except the bore, I use Mil-Comm MC25 Firearm Cleaner/Degreaser followed by TW-25B Lubricant (grease) any place metal slides on metal (look for the wear marks). For protection from finger-oil, I use a very lightly oiled rag anywhere I might touch the bluing but then vigorously wipe it as dry as possible.
On a personal recommendation, I contacted Mike Kelly for a trigger job on the Springfield Armory Mil-Spec (1911 in .45 caliber). He invited me to his shop/home.
Posted to Bullseye-L
With all of the conversations on this list about sight picture, where to focus, how to hold, what loads are used at the short versus the long line, when to think and when to just shoot, safety is seldom mentioned but, nonetheless, is in every movement we make at the line.
(Posted as user eskinner at Rimfire Central.)
I replaced my extractor a couple of months ago (because it just wasn’t there anymore) using parts from Brownells (extractor spring, plunger and extractor). [S&W was “out of stock” on the extractor.]
I bought a parkerized Springfield Armory Mil-Spec 1911 from one of the gun stores in Phoenix AZ. This is a very popular model and dealers only have them for a short interval if at all. My usual haunt for guns, Sportsman’s Warehouse, was out of stock so when I found this model in another store for only a little more than I would’ve paid at Sportsman’s Warehouse, I took it. I paid $495.00 plus tax.